Breaking rock is a laborious task that demands strength and expertise. Jackhammers, which are regularly referred to as pneumatic drills, are when it comes to liquefying rock. Packed with compressed air, they possess a chisel-like chunk that penetrates the rock in order to accomplish the job.
The jackhammer wielder has to use extreme caution to prevent the nearby rock or structure from being destroyed. The release of air pressure and the heaviness of the jackhammer can make using the chisel bit unruly. Furthermore, they must watch out for any rock fragments that might fly and initiate a hazardous situation.
To start the process of breaking stone, a pressurized drill is used to bore several holes into the rock, keeping about ten inches between them and going in around two feet deep. An explosive is placed within these gaps, to which a detonator cap is connected. After retreating to a safe spot, the explosive is set off and the rock is broken.
The operator must declare success or failure after detonating the dynamite, which they determine by inspecting the rock. If the rock stands intact despite the explosion, more holes must be drilled and their efforts must be repeated. However, if the rock has been successfully fractured, it can then be readily dismantled using a powerful pneumatic drill or a feasible sledgehammer.
While quarrying rocks can potentially be risky, with the right guidance and protective equipment it can become a fulfilling and secure experience. Breaking rock is a tough task but when taken on with mindful preparation, its rewards are ample.
Short Description: YT29A air-legged rock drills are heavy-duty push-leg (air-legged) rock drills with low energy consumption, which are more suitable for drilling horizontal or inc […]
Short Description: The YT28 air-leg rock drill is a kind of high-efficiency, energy-saving and environmentally friendly rock drilling equipment. Compared with similar pneumatic pro […]
Short Description: The YT27 air-legged rock drill is a highly efficient lightweight rock drill suitable for downward or inclined drilling in medium-hard or hard (f=8 – 18) ro […]
Product description： (S250 jackleg Drill) has been the preferred choice of miners who demand high performance, superior control and lasting reliability. the S250 jackleg allows ope […]
Scope of application: Model S82 air-legged rock drills are heavy-duty air-legged rock drills with high efficiency and low consumption, which are especially suitable for use in the […]
Product introduction Y26 hand-held rock drill is mainly used for drilling shell holes and secondary blasting in mines, railroads, water conservancy, and rock works, which can dry a […]
Product description： Y24 hand-held rock drill is a variant of YT24 air-leg rock drill in our factory. It has the advanced level in China and was rated as the high quality product i […]
Product description： Y20LY hand-held pneumatic leg dual drill is a kind of light rock machinery, which can be used in secondary blasting in mines and quarries as well as in stone w […]
Product Description： Y18 hand – held and air – leg drill is suitable for drilling and blasting holes on soft, medium and hard rocks and W-1.5/4, W-1.8/5, W-2/5 and othe […]
