If you need to demolish concrete, a pneumatic concrete breaker machine is the ideal solution. Selecting the right model and size of a pneumatic concrete breaker for the task at hand is crucial. Here are some helpful tips in getting the most out of your pneumatic breaker:
Wielding a pneumatic concrete breaker requires one to don safety equipment; this is essential, including eye and ear wear, in addition to gloves.
Before utilizing your particular pneumatic concrete breaker, it is imperative that you thoroughly review the manufacturer’s guide for further details.
When utilizing the equipment, firstly position the chisel end in a downwards direction and apply pressure into the concrete. By using pressure onto the chisel point, the concrete shall easily shatter.
The side of the machine can also be employed to break up concrete; to do so, simply angle the device and press it against the material.
When you operate the pneumatic concrete breaker, exercise caution not to push the machine too far. If the concrete is excessively hard, then you risk harming the device.
Following these guidelines, you can safely and successfully use a pneumatic concrete breaker machine with confidence.
Short Description: YT29A air-legged rock drills are heavy-duty push-leg (air-legged) rock drills with low energy consumption, which are more suitable for drilling horizontal or inc […]
Short Description: The YT28 air-leg rock drill is a kind of high-efficiency, energy-saving and environmentally friendly rock drilling equipment. Compared with similar pneumatic pro […]
Short Description: The YT27 air-legged rock drill is a highly efficient lightweight rock drill suitable for downward or inclined drilling in medium-hard or hard (f=8 – 18) ro […]
Product description： (S250 jackleg Drill) has been the preferred choice of miners who demand high performance, superior control and lasting reliability. the S250 jackleg allows ope […]
Scope of application: Model S82 air-legged rock drills are heavy-duty air-legged rock drills with high efficiency and low consumption, which are especially suitable for use in the […]
Product introduction Y26 hand-held rock drill is mainly used for drilling shell holes and secondary blasting in mines, railroads, water conservancy, and rock works, which can dry a […]
Product description： Y24 hand-held rock drill is a variant of YT24 air-leg rock drill in our factory. It has the advanced level in China and was rated as the high quality product i […]
Product description： Y20LY hand-held pneumatic leg dual drill is a kind of light rock machinery, which can be used in secondary blasting in mines and quarries as well as in stone w […]
Product Description： Y18 hand – held and air – leg drill is suitable for drilling and blasting holes on soft, medium and hard rocks and W-1.5/4, W-1.8/5, W-2/5 and othe […]
